Setup guide

6
2. Installation
2.1 Checking the DVR and its Accessories
When you receive the product, check that all the items are included in your package.
2.2 HDD Installation
The DVR is not fitted with a Hard Drive unless purchased separately. The size of
the Hard Drive can be calculated according to the total capacity required. A table is
supplied at the end of this manual.
.
This DVR uses one SATA Hard Drive up to a maximum of 1 Tb.
First remove DVR case top.
Fit hard drive to base plate with screws.
Connect SATA data cable correctly and then power cable. Ensure cables are fitted
tightly.
Refit DVR case top and power up unit.
Ensure HDD is formatted before use. Details can be found in this manual.