Setup guide

Display Position and format

Move to the Position button and press Enter to enter setup image. Here you

will find there are 22 x 18 small panes with the OSD position marked in red.

Use the arrow keys to move to the required OSD position.

Press Edit key to select OSD format

The following OSD formats are provided:

MM DD YYYY W hh:mm:ss (default)

MM DD YYYY hh:mm:ss

DD MM YYYY hh:mm:ss

YYYY MM DD W hh:mm:ss

YYYY MM DD hh:mm:ss

YYYY = Year, MM = month, W = weekday, hh = hour, mm = minutes,

ss = seconds

Press Enter to save and return to Image menu or press ESC to abort.

Copy parameters

After the setup properties of one camera has been completed you can copy the

same values to other cameras. Press the Copy to Camera box and enter the

required camera number.

Camera Name

In the Image menu you can set the name for each camera. Note that camera

names cannot be copied. The following steps cover setting the camera name:

1. Select one camera

2. Move to Name box and press Edit button and then input digital

numbers, uppercase or lowercase characters as detailed earlier.

The camera name can be 32 characters long maximum.

3. Press Edit key to exit edit status. Select Confirm and press Enter to

save the change and you will now see the new camera name. Press

Cancel button or ESC key to abort.

NOTE: To change to Upper case, lower case, numerics or symbol press the A

button and then press 0 to scroll through characters required. Click on the

number appertaining to the character or symbol required.

Setup Camera Name Position

If you do not want to display camera name disable the check box beside

camera Name with an X. If you enable the check box you can setup the

camera name position. The steps are:

1. Enter the Image Setup menu

2. Select one camera

3. Enable the check box on the side of the camera name and move to the

Position button. Now press Enter and using the arrow keys move

camera name position. When set, press Enter to fix position and return

to Image menu. Then press Confirm button to save. If Cancel or ESC

is pressed in the Image Setup menu the change will be cancelled.