Setup guide

23
ticked. You can use the same method to select other files to backup.
When you have selected the files to backup go to the next step.
3. At this point select the required backup device. You can select from
the following devices: USB memory stick or USB CD-R/W.
4. Press the Save button and press the Enter key to start backup. When
backup starts the corresponding message box will indicate the result.
Backup video segment
An additional facility is available to backup parts of an incident. This may
be useful when there is a part of the recording not required. The following steps need
to be followed:
1. Start playback or select playback by time.
2. Press the Edit key to start selecting the current playback image and
press Edit again to stop selecting the segment required.
3. Repeat step 2 to select up to 30 segments maximum.
4. On completion of the selection of segments press the ESC key and a
dialogue box will be displayed. If you press the Confirm key the DVR
will start to backup the selected segments. If you press the Cancel
button the DVR will abort the backup.