Datasheet
Alice © 2020 Mic Amp PAK Solo MKII www.alice.co.uk/support support@alice.co.uk
Mic Amp PAK Solo MKII with USB
The Alice Mic Amp PAK is a single channel mic amp with an audio transformer input and a
sophisticated discrete input stage, gain control and balanced output.
The USB output on the solo version appears as mono in both left and right outputs.
This unit is ideal for remote presenters and contributors to radio and TV shows using an
existing microphone and the USB output into a PC or laptop.
Technical Specification
Min gain: 33.4dB
Max gain: 79.7dB
Frequency response: 20Hz to 20KHz +/- 1dB
Noise: 127.7dB below input at 70dB gain measured against 200ohm input 20Hz to 20KHz bandwidth
High pass filter switch: 12dB/8ve 3dB point 75Hz
Harmonic distortion: measured at 50dB gain – At 95Hz 2
nd
order -74dB, 3
rd
order -80dB. (0.02%)
At 1KHz 2
nd
order -84dB, 3
rd
order -72dB. (0.018%)
At 3.5KHz 2
nd
order -80dB, 3
rd
order -63dB. (0.08%)
Phantom power switch: 48v
The power supply is integral with the audio board and has linear regulators powered from an
encapsulated mains transformer.
Mains ground is internally connected to audio ground
Supplied with 2m IEC mains cable
Mains supply: 230 V AC 3VA (115V via internal links)
Power consumption: 3VA
Dimensions: 275 (W) x 115 (D) x 42 (H)
Shipping Weight: 1.20Kg