User manual
80
2. To congure Motion Detection:
a. Choose camera you want to congure.
b. Check the Enable Motion Detection box.
c. Use the mouse to drag a rectangle across the area where you want to detect motion. A red grid will appear in the area(s)
selected. If you want to sense for motion detection in all areas of the video, click Full Screen.
NOTE: The example shown here is for a 3S Vision camera. Other camera brands and models have dierent methods for
designating the motion detection areas.
To deselect an area selected for motion detection, drag a rectangle across that area. To clear all areas selected, click Clear.
d. Click Settings to open the Settings Trigger Channel tab window.
SECTION 6: RECORD, PLAYBACK AND VIDEO BACKUP