User manual
71ALI-NVR5000P Embedded NVR User Manual
3. Click , then use the mouse to drag the image, or click the eight directional buttons in the control box under the image, to
move the PTZ camera. The movement of the camera will be recorded as the pattern.
4. Click to save the pattern.
5.2.6 Calling Patterns
Follow the procedure to move the PTZ camera according to the predened patterns. The pattern in in the PTZ Setting interface
1. Open the PTZ settings menu. Go to: Menu | Camera | PTZ | More Settings
2. Select the number of the pattern you want to call.
3. Click to start the pattern. Click to stop it.
Call pattern in live view mode
1. Click the PTZ button in the lower-right corner of the PTZ setting interface, press the PTZ button on the front panel,
or click the PTZ Control icon
in the Quick Setting bar to enter the PTZ setting menu in live view mode.
2. Choose Pattern on the control bar.
3. Double click the pattern number, or select the pattern and click the associated icon to start it.
5.3 PTZ Control Panel
To enter the PTZ control panel, do one of the following:
• In the PTZ Settings interface, click the PTZ button on the lower-right corner. It is next to the Back button.
• In the Live View mode, press the PTZ Control button on the front panel or on the remote control, or choose the PTZ Control
icon
on the Quick Settings toolbar .
Click the Conguration button on the control panel, and you can enter the PTZ Settings interface.
NOTE
In PTZ control mode, the PTZ panel will be displayed when a mouse is connected with the device. If no mouse is connected, the PTZ
icon appears in the lower-left corner of the window, indicating that this camera is in PTZ control mode.
SECTION 5: PTZ CONTROLS