User manual
67ALI-NVR5000P Embedded NVR User Manual
3. Click the preset number you want to call.
Call preset in live view mode:
1. Click the button PTZ in the lower-right corner of the PTZ setting interface, press the PTZ button on the front panel,
or click the PTZ Control icon
in the quick setting bar to enter the PTZ setting menu in live view mode.
2. In the Conguration section, choose the PTZ camera you want to use.
3. Click Preset, then double click the preset number in the list to call it.
5.2.3 Customizing Patrols
Patrols can be set to position a PTZ camera to a KeyPoint (Preset number) and hold it there there for a set duration (dwell) before
moving on to another KeyPoint (Preset number). To create Preset positions for the camera, see “5.2.1 Customizing Presets” on page
65 .
1. Open the PTZ settings menu. Go to: Menu | Camera | PTZ | More Settings
SECTION 5: PTZ CONTROLS