User manual
64
4. Click the single- or multi-screen select icon for the screen split you prefer. In the example shown above, a 4 * 4 screen is
selected.
5. Click a viewing screens, then double-click the camera in the list on the left that you what to show there. When the selection is
made, label in the viewing screen changes to the camera channel number. You can also click an icon to Start or Stop Live view
of all channels.
6. Click the Apply button to save your setting.
4.4 Channel-Zero Encoding
The Channel-Zero Encoding menu is used to congure the NVR for viewing multiple video channels simultaneously with a remote
client. This features allows you to decrease the bandwidth requirement without aecting the image quality. To use Channel-Zero
Encoding:
1. Open the Channel-Zero Encoding menu. Go to Menu | Conguration | Live View | Channel-Zero Encoding
2. Check the box to Enable Channel Zero Encoding.
3. Congure the Frame Rate, Max. Bitrate Mode and Max. Bitrate as needed.
4. Click Apply.
After setting Channel-Zero Encoding, you can see up to 16 channels of live video on one screen of the remote client.
SECTION 4: LIVE VIEW INTERFACE