User manual
63ALI-NVR5000P Embedded NVR User Manual
Adjust the settings in the screen as needed:
— Video Output Interface: Designates the output to congure the settings for. Option includes only VGA/HDMI.
— Live View Mode: Designates the display mode (screen split) to be used for Live View. 1 * 1 is a single camera view.
Other options are 2 * 2, 1 + 5, 1 + 7, 3 * 3. 4 * 4
— Dwell Time: The time in seconds to dwell between switching channels when auto-switch is enabled in Live View.
— Enable Audio Output: Enables/disables audio output for the selected video output.
— Event Output: Designates the output to show event video. Option includes only VGA/HDMI.
— Full Screen Monitoring Dwell Time: The time in seconds to show alarm event screen.
2. After changing settings in the screen shown above, click Apply, and then click Back.
3. Click the View tab at the top of the screen.
Single-, multi-screen select icons
Start/stop live view of all channels
Viewing screens
SECTION 4: LIVE VIEW INTERFACE