User manual
62
4.3 Live View pop-up menu
Right-clicking the mouse on the desktop opens the pop-up window shown below.
Clicking one of the items listed produces the result described below.
— Menu: Opens the conguration menu window. See “SECTION 6 Record, Playback and Video Backup” on page 73.
— Single Screen: showing only one camera channel on the monitor. Open the drop-down list to select the camera
channel you want to view.
— Multi-screen: opens a submenu where you can choose from several multi-channel screen congurations, including
2 * 2, 1 + 5, 1 + 7, 3 * 3 , 4 * 4 in multi-screen mode, you can view video from multiple camera channels
simultaneously.
— Previous screen: Move to the screen displayed previously.
— Next screen: Move to the screen displayed after the current one.
— Start Auto-switch: the screen is automatically switched from one camera channel to the next. You must set the dwell
time before enabling auto-switch. Go to Menu | Conguration | Live View | Dwell Time.
— Start Recording: Select Normal Record and Motion Detection record from the drop-down list.
— Add IP Camera:
— Playback: Opens a playback menu where you can playback video recorded at a specic time of the day.
— Output Mode: opens a menu where you can select the output mode to Standard, Bright, Gentle or Vivid.
— Aux Monitor: Switch to auxiliary output mode. The main output will be disabled.
4.3.1 Live View settings
Live View settings can be customized according to diering needs. You can congure the screen frame split, placement of camera
channels on the screen, dwell time for screen to be shown, mute or turning on the audio, the screen number for each channel, etc.
1. Open the Live View Settings menu. Go to Menu | Conguration | Live View
SECTION 4: LIVE VIEW INTERFACE