User manual
59ALI-NVR5000P Embedded NVR User Manual
4.1.2 Using the mouse in Live view
Table 3. Mouse operation in Live view
Name Description
Menu Enter the main menu of the system by right clicking the mouse.
Single Screen Switch to single full screen by choosing channel number from the drop down list.
Multi-screen Select the screen layout from the drop down list.
Previous Screen Switch to the previous screen.
Next Screen Switch to the next screen.
Start/Stop Auto-switch Enable/disable the auto-switch feature.
Start Recording Start continuous recording or motion detection recording of all channels.
Add IP Camera Enter the IP Camera Management interface to add cameras.
Playback Enter the playback interface and start playing back the video of the selected channel.
Output Mode Select one of four output modes: Standard, Bright, Gentle or Vivid.
Aux Monitor Switch to the auxiliary output mode. The operation for the main output is disabled.
NOTE
• The dwell time of the live view conguration must be set before using Start Auto-switch.
• If you enter Aux monitor mode and the Aux monitor is not connected, the mouse operation is disabled; switch back
to the Main output with the MAIN/AUX button on the front panel or remote control.
• If the corresponding camera supports intelligent function, the Reboot Intelligence option is included when right-
clicking the mouse on this camera.
4.1.3 Using an Auxiliary monitor
Some features of Live view mode are also available with an Auxiliary monitor. These features include:
• Single Screen: Switch to a full screen display with the selected camera. Select the camera from a drop down list.
• Multi-screen: Switch between dierent display layout options. Select the Layout option from a drop down list.
• Next Screen: When displaying less than the maximum number of cameras in Live View, clicking this feature will switch to
the next set of displays.
• Playback: Enter into Playback mode.
• PTZ: Enter PTZ Control mode.
• Main Monitor: Enter Main operation mode.
SECTION 4: LIVE VIEW INTERFACE