User manual
58
• Add IP Camera: the shortcut to the IP camera management interface.
• Playback: playback the recorded videos for current day.
• Aux/Main output switch: the NVR checks the connection of the output interfaces to dene the main and auxiliary output
interfaces. The priority level for the main and aux output is HDMI > VGA > CVBS. This means if the HDMI is used, it will be
the main output. If the HDMI is not used, the VGA output will be the main output. See the table below.
Table 1. Interface priority
HDMI VGA CVBS Main output Auxiliary output
1 √ √ √ HDMI VGA
2 √ × √ HDMI CVBS
3 × √ √ VGA CVBS
4 × × √ CVBS
√ means the interface is in use.
× means the interface is not in use or the connection is invalid.
HDMI, VGA and CVBS can all be used at the same time.
When the aux output is enabled, the main output can’t do any operation, and you can do some basic operation on the live view
mode for the Aux output.
4.1.1 Front panel operation on Live view
Table 2. Front panel operation in Live view
Function Front panel operation
Show single screen Press the corresponding alphanumeric button. For example, press 2 to display only the screen for channel 2.
Show multi-screen Press the PREV/FOCUS- button.
Manually switch screens Next screen: right/down direction button. Previous screen: left/up direction button.
Auto-switch Press Enter button.
Playback Press Play button.
Switch between main and
aux output
Press Main/Aux button.
SECTION 4: LIVE VIEW INTERFACE