User manual
57ALI-NVR5000P Embedded NVR User Manual
SECTION 4
Live View Interface
The Live View interface is the primary camera viewing and monitoring mode. It can be congured to present video from the
cameras congured in the system singularly or in multi mode, or using a “patrol” feature wherein video from each of a select group
of cameras is displayed singularly and sequentially, with each camera view shown for a preset duration (dwell). The Live View
screen can be congured to display 1, 4, 6, 8, 9 or 16 camera channels concurrently, or playback recorded video.
Live View 2 * 2 multi-screen display
Each camera channel displayed on the Live View screen may contain one or both status icons in the upper-right corner of the
viewing frame.
4.1 Operations in Live view mode
In Live view mode, several features are provided:
• Single Screen: showing only one screen on the monitor.
• Multi-screen: showing multiple screens on the monitor simultaneously.
• Auto-switch: the screen is auto switched to the next camera. You must set the dwell time for each screen on the
conguration menu before enabling the auto-switch. See Menu | Conguration | Live View | Dwell Time.
• Start Recording: continuous record and motion detection record are supported.
• Output Mode: select the output mode to Standard, Bright, Gentle or Vivid.
SECTION 4: LIVE VIEW INTERFACE