User manual
52
If alarms are triggered simultaneously in several channels, their full-screen images will be switched at an interval of 10 seconds
(default dwell time). A dierent dwell time can be set by going to Menu | Conguration | Live View | Full Screen
Monitoring Dwell Time.
Auto-switch will terminate when the alarm condition ends. The NVR will revert to the Live View interface.
NOTE
You must select the channel(s) you want to display with full screen monitoring in the “Trigger Channel” settings menu.
Audible Warning
Trigger an audible beep when an alarm is detected.
Email Linkage
Send an email with alarm information to a user or users when an alarm is detected. The Email networking feature must be
congured for email to be sent.
Trigger Alarm Output
Trigger an alarm output when an alarm is triggered.
1. Open the Alarm Output menu. Go to Menu | Conguration | Alarm | Alarm Output
SECTION 2: INSTALLING THE SYSTEM