User manual

49ALI-NVR5000P Embedded NVR User Manual
14. Select the Linkage Action tab to set up alarm response actions of the alarm input.
15. In the Linkage Action menu, select the actions you want to occur when the alarm is active, then click Apply to save the
settings. If PTZ cameras are not installed on your system, click OK to return to the Alarm Input menu.
16. If PTZ cameras are installed on your system, select the PTZ Linking tab to set up alarm response actions of PTZ cameras.
NOTE
• Verify that your PTZ or speed dome camera supports PTZ linkage before making these settings.
• One alarm input can trigger presets, patrols or patterns of more than one channel.
17. Select the preferred options in the PTZ Linking menu, then click Apply.
18. Click OK to return to the Alarm Input menu.
SECTION 2: INSTALLING THE SYSTEM