User manual

48
7. Select the Trigger Channel tab, if not selected. Select one or more camera channels which will start to record/capture or
become full-screen monitoring when the external alarm is active.
8. Click Apply to save the settings.
9. Select the Arming Schedule tab to set the arming schedule of actions.
10. Choose one day of the week, then click the entries below to specify the time periods when the alarm will be armed. A
maximum of eight time periods can be set within each day. Time periods cannot overlap or be repeated.
11. Click Apply to save the settings.
12. Repeat the previous step for other days of the week, or click the Copy button to apply the same schedule to other days.
13. Click Apply to save the settings.
SECTION 2: INSTALLING THE SYSTEM