User manual
43ALI-NVR5000P Embedded NVR User Manual
SECTION 2: INSTALLING THE SYSTEM
2. Click Advanced to check the storage mode of the HDD.
a. In the Mode select eld, select either Partition or Group.
i. If you selected Partition, select a camera in the Camera eld, then enter the size, in gigabytes, in the Max.
Record Capacity eld. Repeat this step for each camera. Click Apply.
ii. If you selected Group, the following window will open. In this window, select a group number, then select the
cameras that are part of that group. Note that a NVR restart is required to use congure the NVR for this feature.