User manual

42
Record/Capture: Use the eSATA device for record and capture data. Refer to the following steps for operating instructions.
3. If the eSATA device will be used for Record/Capture, open the HDD Information interface. Go to Menu | HDD | General.
a. Edit the property of the eSATA device, or click Init to initialize it. Refer to “2.9.4 Conguring the HDD” on page 42 for
more information.
2.9.4 Conguring the HDD
By default, all cameras will record to the one partition(s) of the internal HDD(s). However, the NVR can be congured to allocate
space in one of two modes:
• Partition mode: Each camera can be allocated it’s own recording space on a storage device (HDD).
• Group mode: Groups of cameras can each be allocated recording space on a storage device. Conguring the HDD for Group
recording mode requires an NVR reboot.
To use this feature:
1. Go to Menu | HDD | General.
SECTION 2: INSTALLING THE SYSTEM