User manual
23ALI-NVR5000P Embedded NVR User Manual
2.7.1 Camera OSD setup
You can congure the OSD (On-Screen Display) settings for the camera, including date, time, day of week, camera name, etc.
1. Click OSD in the left frame to open the OSD submenu.
2. In the Camera eld drop down list, select the camera you want to congure. In the example shown, IP Camera 1 is selected.
3. Check or un-check the boxes to display the Name and Date. Also, edit the name in the Camera Name eld, and select the
date and time options you prefer.
NOTE
Cameras you manage with the NVR may be setup internally to show on-screen inrmation, such as name and timestamp. To
change these settings, you must recongure the camera directly; the NVR cannot change these internal settings.
4. Click Apply to save your settings for this camera.
5. Click Copy to copy the Name and Date format settings to other cameras managed by the NVR, if needed.
6. Repeat sub-steps 2 through 5 above for each camera managed by the NVR, if necessary.
2.7.2 Camera Image setup
1. Click Image in the left frame to open the Image submenu.
SECTION 2: INSTALLING THE SYSTEM