User manual
18
7. Click Next after you congured the network parameters. The HDD management Wizard window will open. If a new DVR is
shipped with a pre-congured HDD, nothing needs to be done in this window. If you installed an HDD or replaced the HDD,
select (check the box for) the HDD, then click Init to setup the disk for the DVR. NOTE: Init will erase all data from the disk.
When the initialization is complete, click Next to continue.
8. Use the camera record mode Wizard as follows:
a. On the Cameras line at the top of the window, open the drop-down list and select the camera you want to congure for
recording.
SECTION 2: INSTALLING THE SYSTEM