User manual
17ALI-NVR5000P Embedded NVR User Manual
5. In the date and time setup window, click the eld you want to change, then use the drop-down list or setup aid to select
the appropriate values. Click Next to conrm your settings or Cancel to discard them and open the network setup Wizard
window.
6. In the Network setup Wizard window, click the eld value you want to change, then use the pop-up aid to enter a new value.
By default, the DVR uses DHCP (Dynamic Host Conguration Processor) to acquire compatible (dynamic, changeable) network
settings from a network DHCP server.
Generally, it is preferable to setup the DVR with a xed network settings, if possible, to assure the DVR has an unchanging IP
address for remote login. To enable xed network settings, un-check the Enable DHCP box, then edit the appropriate elds
to change the settings. Consult with your network administrator to determine the best network settings for your DVR. When
nished, click Next.
SECTION 2: INSTALLING THE SYSTEM