User manual
7ALI-NVR5000P Embedded NVR User Manual
SECTION 1: SYSTEM OVERVIEW
1.1.1 Remote control
The enter key on the remote control or the front panel has the same function as a mouse left click. The IR Range of the remote
control is 10 meters. The buttons on the remote control correspond with the buttons on the front panel.
23
18
9
17
7 5
6 4
11141518 16
1213 10
Item Name Function
1 POWER Power on/o the device.
2 DEV Enables/Disables Remote Control.
3 Alphanumeric Buttons Use for entering numerical data
4 EDIT Button
Delete characters before cursor, check the checkbox and select the ON/OFF switch, start/stop record
clipping in playback
5 A Button
Adjust focus in the PTZ Control menu, also used to switch between input methods (upper and lowercase
alphabet, symbols and numeric input).
6 REC Button Open the manual record interface
7 PLAY Button Playback, for direct access to playback interface.
8 INFO Button Reserved.
9 VOIP/MON button Switch between main and spot output. In PTZ Control mode, it is used to zoom out the image.
10 MENU button
Press the button will help you return to the Main menu (after successful login).
Press and hold the button for 5 seconds to turn o audible key beep.
In PTZ Control mode, the MENU/WIPER button will start wiper (if applicable).
11 PREV button
Switch between single screen and multi-screen mode.
In PTZ Control mode, it is used to adjust the focus in conjunction with the A/FOCUS+ button.
12 DIRECTION/ENTER buttons
DIRECTION: These buttons are used to navigate between dierent elds and items in menus.
In the Playback mode, the Up and Down buttons are used to speed up and slow down recorded video. The
Left and Right button select the next and previous record les.
In Live View mode, these buttons can be used to cycle through channels.
In PTZ control mode, they can control the movement of the PTZ camera.
ENTER: The ENTER button is used to conrm selection in any of the menu modes.
It can also be used to tick checkbox elds.
In Playback mode, it can be used to play or pause the video.
In single-frame Playback mode, pressing the button will advance the video by a single frame.
In Auto-switch mode, it can be used to stop /start auto switch.