User manual
131ALI-NVR5000P Embedded NVR User Manual
SECTION 8: NETWORK SETTINGS
3. Enter a new Server Port number and HTTP Port number in the appropriate elds. The default Server Port is 8000 and the HTTP
Port is 80.
NOTE
The Server Port number must be in the range 2000 .. 65535. it is used for remote client software access.
The HTTP port is used for remote IE access.
4. Click Apply to save your settings and close the menu.
8.2.7 Conguring Email
The system can be congured to send an Email notication to all designated users if an alarm event is detected, etc., an alarm or
motion event is detected or the administrator password is changed.
Before conguring the Email settings, the NVR must be connected to a local area network (LAN) that maintains an SMTP mail
server. The network must also be connected to either an intranet or the Internet depending on the location of the e-mail accounts to
which you want to send notication.
1. Open the Network Settings menu. Go to Menu | Conguration | Network
2. Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway and the Preferred DNS Server in the Network Settings menu.