User manual

130
SECTION 8: NETWORK SETTINGS
4. Click Apply to save your settings and close the menu.
NOTE
The multicast function must be supported by the network switch to which the NVR is connected.
8.2.5 Conguring RTSP
The RTSP (Real Time Streaming Protocol) is a network control protocol designed for use in communication systems to control
streaming media servers.
1. Open the Network Settings menu. Go to Menu | Conguration | Network
2. Click the More Settings tab to open the More Settings menu.
3. In the menu shown above, enter the RTSP port number. The default RTSP port is 1050.
4. Click Apply to save your settings and close the menu.
8.2.6 Conguring Server and HTTP Ports
You can change the server and HTTP ports in the Network Settings menu. The default server port is 8000 and the default HTTP port
is 80.
1. Open the Network Settings menu. Go to Menu | Conguration | Network
2. Click the More Settings tab to open the More Settings menu.