User manual
129ALI-NVR5000P Embedded NVR User Manual
SECTION 8: NETWORK SETTINGS
3. Enter the Alarm Host IP address and Alarm Host Port in the appropriate elds. The Alarm Host IP address is the IP address of
the remote PC on which Network Video Surveillance Software is installed. The Alarm Host Port must be the same as the alarm
monitoring port congured in the software.
4. Click Apply to save your settings and close the menu.
8.2.4 Conguring Multicast
Using the multicast function, more than 64 cameras are connectable. A multicast address spans the Class-D IP range of 224.0.0.0 to
239.255.255.255. We recommended that you use the IP address range from 239.252.0.0 to 239.255.255.255.
1. Enter the Network Settings interface. Go to Menu | Conguration | Network
2. Click the More Settings tab to open the More Settings menu.
3. Set the Multicast IP address. When adding a device to the Network Video Surveillance Software, the multicast address must be
the same as the NVR’s multicast IP.