User manual
4
Name Function / Description
Status Indicators
(cont.)
STATUS
The light is green when the IR remote control is enabled;
The light is red when the function of the composite keys (SHIFT) are used;
The light is out when none of the above condition is met.
ALARM The light is red when there is an alarm occurring.
HDD Blinks red when HDD is reading/writing.
Tx/Rx Blinks green when network connection is functioning normally.
Control Buttons
DIRECTION
In menu mode, the direction buttons are used to navigate between dierent elds and items and select setting
parameters.
In playback mode, the Up and Down buttons are used to speed up and slow down record playing, and the Left and
Right buttons are used to move the recording 30s forwards or backwards.
In the image setting interface, the up and down button can adjust the level bar of the image parameters.
In live view mode, these buttons can be used to switch channels.
ENTER
The Enter button is used to conrm selection in menu mode; or used to check checkbox elds and ON/OFF switch.
In playback mode, it can be used to play or pause the video.
In single-frame play mode, pressing the Enter button will play the video by a single frame.
In auto sequence view mode, the buttons can be used to pause or resume auto sequence.
Composite Keys
SHIFT
Switch between the numeric or letter input and functions of the composite keys. (Input letter or numbers when the
light is out; Realize functions when the light is red.)
1/MENU
Enter numeral “1”;
Access the main menu interface.
2/ABC/F1
Enter numeral “2”;
Enter letters “ABC”;
The F1 button when used in a list eld will select all items in the list.
3/DEF/F2
Enter numeral “3”;
Enter letters “DEF”;
The F2 button is used to change the tab pages.
In PTZ control mode, it zooms in the image.
Composite Keys
(cont.)
4/GHI/ESC
Enter numeral “4”;
Enter letters “GHI”;
Exit and back to the previous menu.
SECTION 1: SYSTEM OVERVIEW