User manual

2
Lock/unlocking video les.
Searching and playing back record les by channel number, recording type, start time, end time, etc.
Motion analysis for the selected area in the video.
Zoom in/out during playback.
Forward/reverse, fast/slow playback.
Forward/reverse multi-channel playback.
Supports pause, skip forward and skip backward during playback.
Up to 16-channel synchronous playback at 4CIF real time.
Manual capture, continuous capture of video images and playback of captured pictures.
Backup
Export video data to USB or eSATA device.
Export video clips during playback.
Management and maintenance of backup devices.
Either Normal or Hot Spare working mode is congurable to constitute an N+1 hot spare system.
Alarm and Exception
Congurable arming time of alarm input/output.
Alarm for video loss, motion detection, tampering, abnormal signal, video input/output standard mismatch, illegal login,
network disconnected, IP coniction, abnormal record/capture, HDD error, and HDD full, etc.
Alarm triggers full screen monitoring, audio alarm, notifying surveillance center, sending email and alarm output.
Automatic restore when system is abnormal.
Other Local Functions
Operable by front panel, mouse, remote control, and control keyboard.
Three-level user management; admin user is allowed to create many operating accounts and dene their operating
permission, which includes the limit to access any channel.
Operation, alarm, exceptions and log recording and searching.
Manually triggering and clearing alarms.
Import and export of device conguration information.
Network Functions
Self-adaptive 10M/100M/1000M network interface with multi-address, load balance, network fault tolerance, etc.
16 independent PoE network interfaces
IPv6 supported
Supports TCP/IP, PPPoE, DHCP, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS and iSCSI I protocols.
Supports TCP, UDP and RTP for unicast.
Auto/manual port mapping by UPnP™.
SECTION 1: SYSTEM OVERVIEW