Setup guide
7 www.Observint.com
© 2014 Observint Technologies. All rights reserved.
Live View display after camera adjustments
Step 4. Access the Menu system
After the initial setup of your DVR using the Wizard, the Menus interface enables you to rene your conguration settings and expand the
functionality of the system. To use most menus, the user must log into the DVR system, either locally or remotely, with administrative
privileges.
To open the Menu system from the Live View screen, right click anywhere in the screen, then select Menu.
If ID Authentication is not disabled (see the Menu | Conguration | General settings), a login window will open. In the Login window,
select a User Name with administrative privileges, enter its password, then click OK. NOTE: A window of Menu icons will open. The default
user “admin” has the default password of “1111”.
Click the star for Continuous or Motion Detection, click Yes in the Attention pop-up window, and then click OK to save the
settings. The Wizard will close and the NVR will present the Live View display. See the ALI-NVR5000P Series Embedded Network
Video Recorder User Manual for more information.
Live View display
10. While viewing video from each cameras in the Live View display, adjust the direction of each camera to aim it at its surveillance
target. Follow the manufacturer’s recommended procedures for aiming the cameras.