User manual

— Set the user Level to Operator or Guest. Dierent Levels have dierent operating permission.

* Operator: The Operator user level has permission of Two-way Audio in Remote Conguration and all operating

permission in Camera Conguration by default.

* Guest: The Guest user has no permission of Two-way Audio in Remote Conguration and only has the local/remote

playback in the Camera Conguration by default.

— User’s MAC Address: The MAC address of the remote PC which logs onto the NVR. If this option is congured and

enabled, a remote user with this MAC address only can access the NVR.

4. Click the OK to save the settings and go back to the User Management interface. The added new user will be displayed on the

list. See the screen shown below.

5. Select the user from the list and then click the button to enter the Permission settings (Per icon) interface. In the example

above, user “01” was selected.

6. Set the operating permission of Local Conguration, Remote Conguration and Camera Conguration for the user.

Local Conguration options:

— Local Log Search: Searching and viewing logs and system information of NVR.

— Local Parameters Settings: Conguring parameters, restoring factory default parameters and importing/exporting

conguration les.

SECTION 5: RECORD, PLAYBACK AND VIDEO BACKUP