User manual

52
5.1.3 ConguringMotionDetectionRecording
Follow the steps to set the motion detection parameters. A motion detection events can trigger several kind of actions by the NVR,
including channels to start recording, full screen monitoring, an audio warning, notication sent to the surveillance center, etc.
Follow the steps below to schedule a recording triggered by a motion detection.
1. Open the Motion Detection menu. Go to Menu | Camera | Motion
2. To congure Motion Detection:
a. Choose camera you want to congure.
b. Check the Enable Motion Detection box.
c. Use the mouse to drag a rectangle across the area where you want to detect motion. A red grid will appear in the area(s)
selected. If you want to sense for motion detection in all areas of the video, click Full Screen.
NOTE: The example shown here is for a 3SVision camera. Other camera brands and models have dierent methods for
designating the motion detection areas.
To deselect an area selected for motion detection, drag a rectangle across that area. To clear all areas selected, click Clear.
d. Click Handling, to open the Handling Trigger Channel tab window.
SECTION 5: RECORD, PLAYBACK AND VIDEO BACKUP