Manualshelf

User manual

ManualsBrandsALIBI ManualsComputer equipmentALI-NVR3004P
51525354555657585960
44
— Multi-screen: opens a submenu where you can choose from several multi-channel screen congurations, including
2 * 2, 1 + 5, 1 + 7, 3 * 3 , in multi-screen mode, you can view video from multiple camera channels simultaneously.
— Previous screen: Move to the screen displayed previously.
— Next screen: Move to the screen displayed after the current one.
— Start Auto-switch: the screen is automatically switched from one camera channel to the next. You must set the dwell
time before enabling auto-switch. Go to Menu | Conguration | Live View | Dwell Time.
— Start Recording: Select Normal Record and Motion Detection record from the drop-down list.
— Output Mode: opens a menu where you can select the output mode to Standard, Bright, Gentle or Vivid.
— All-day Playback: Opens a playback menu where you can playback video recorded at a specic time of the day. In If
in Multi-screen mode, double-click on the viewing frame of the camera recording video you want to replay, then select
All-day Playback. A marker on the timeline shows the time recording being played back was made.
4.2.1 LiveViewsettings
Live View settings can be customized according to diering needs. You can congure the screen frame split, placement of camera
channels on the screen, dwell time for screen to be shown, mute or turning on the audio, the screen number for each channel, etc.
1. Open the Live View Settings menu. Go to Menu | Conguration | Live View
Adjust the settings in the screen as needed:
— Video Output Interface: Designates the output to congure the settings for. Option includes only VGA/HDMI.
— Live View Mode: Designates the display mode (screen split) to be used for Live View. 1 * 1 is a single camera view.
Other options are 2 * 2, 1 + 5, 1 + 7, 3 * 3 etc.
— Dwell Time: The time in seconds to dwell between switching channels when auto-switch is enabled in Live View.
— Enable Audio Output: Enables/disables audio output for the selected video output.
— Event Output: Designates the output to show event video. Option includes only VGA/HDMI.
— Full Screen Monitoring Dwell Time: The time in seconds to show alarm event screen.
2. After changing settings in the screen shown above, click Apply, and then click Back.
3. Click the View tab at the top of the screen.
SECTION 4: LIVE VIEW INTERFACE