User manual
35ALI-NVR3004P, ALI-NVR3008P Embedded NVR User Manual
a. In the Mode select eld, select either Partition or Group.
i. If you selected Partition, select a camera in the Camera eld, then enter the size, in gigabytes, in the Max.
Record Capacity eld. Repeat this step for each camera. Click Apply.
ii. If you selected Group, the following window will open. In this window, select a group number, then select the
cameras that are part of that group. Note that a NVR restart is required to use congure the NVR for this feature.
2.8.4 HDDDetect
The HDD Detect feature provides two methods of monitoring the HDD: display of S.M.A.R.T. (Self-Monitoring, Analysis and
Reporting Technology) data, and Bad Sector Detection. These methods can be used to assure the normal functioning of the disk,
and anticipate failures.
S.M.A.R.T. Display
1. Open the S.M.A.R.T. display menu. Go to Menu | HDD | HDD Detect
SECTION 2: INSTALLING THE SYSTEM