User manual
29ALI-NVR3004P, ALI-NVR3008P Embedded NVR User Manual
i. Click Apply, and then click OK to close the IP Camera Edit window.
j. In the IP Camera screen, click the Refresh button at the bottom of the camera list. The camera you added will appear and
show a Connected status, usually within a three minutes.
k. For the camera you added, click the icon in the Live column to verify that a video image is being received by the NVR.
2.7.1 Editingcameraoptions
After adding of the IP cameras that are installed on the local LAN to the NVR, some camera setup information can be recongured.
1. For the entry in the camera channel table, click the icon in the edit column.
2. Change the settings in the Edit IP Camera menu as needed.
SECTION 2: INSTALLING THE SYSTEM