User manual
26
b. In the Arming Schedule tab, dene a daily schedule for up to eight weeks (56 days) when motion detection is
monitored. Time periods cannot overlap.
c. Click the Handling tab. In the Handling tab, you can cause certain actions to occur when video loss occurs.
d. Select the actions you want to occur, then click Apply to save your settings, and OK to return to the Video Loss menu.
The Notify Surveillance Center and Send Email options require additional network settings.
4. In the Video Loss menu, click Apply to save your settings for this camera.
5. Repeat sub-steps 2 through 4 above for each camera managed by the NVR, if necessary.
2.7 Adding cameras manually
IP cameras can connect to the NVR either through the IP ports on the back panel of the NVR, or through the LAN the NVR is
connected to. IP cameras connected to the IP ports on the back panel are automatically added to the system by the NVR. Cameras
that exist on the LAN must be added manually through the NVR Camera menus. Use the following procedural guidelines installed
on the LAN.
NOTE
For a lists IP cameras compatible with your NVR, refer to: “APPENDIX D NVR Compatible Cameras” on page 126.
1. Open the Camera Management menu. Go to Main menu | Camera | Camera
SECTION 2: INSTALLING THE SYSTEM