User manual
24
a. In the Arming Schedule tab, dene a daily schedule for up to eight weeks (56 days) when the camera is monitored for
tamper. Time periods cannot overlap.
b. Click the Handling tab. In the Handling tab, you can cause certain actions to occur when tampering occurs.
c. Select the actions you want to occur, then click Apply to save your settings, and OK to return to the Tamper-proof
menu. The Send Email option require additional network settings. See “SECTION 7 Network Settings” on page 89 for
more information.
d. In the Tamper-proof menu, click Apply to save your settings for this camera.
e. Repeat sub-steps 2 through 4 above for each camera managed by the NVR, if necessary.
NOTE
Test your settings during broad conditions to ensure that your tamper-proof settings trigger an action. You may need to return to
this menu later to adjust the Sensitivity slider to ensure the feature is working properly.
SECTION 2: INSTALLING THE SYSTEM