User manual
19ALI-NVR3004P, ALI-NVR3008P Embedded NVR User Manual
2. In the Camera eld drop down list, select the camera you want to congure. In the example shown, IP Camera 1 is selected.
3. Drag the Brightness, Contrast, Saturation and Hue adjustment markers left or right to perfect the image from the
camera. For some adjustments, you can click the up ( 5 )or down ( 6 )icons near the adjustment value (on the right side) to
incrementally change the value of those adjustment.
4. Click Apply to save your settings for this camera.
5. Repeat sub-steps 2 through 4 above for each camera managed by the NVR, if necessary.
2.6.3 CameraMotiondetectionsetup
1. Click Motion in the left frame to open the Motion submenu.
SECTION 2: INSTALLING THE SYSTEM