User manual

111ALI-NVR3004P, ALI-NVR3008P Embedded NVR User Manual
SECTION 9: REMOTE ACCESS
2. In the login window, enter your User Name and Password in the appropriate elds, then click Login. The default User
Name and Password for the NVR is admin and 1111.
3. If this login is the rst login to the NVR from your computer and browser, continue with the following sub-steps:
a. After a successful login to the NVR, a message will appear in the middle of the Live View window requiring you to load a
plug-in. Click on the message to continue, then click Run in the pop-up window at the bottom of the screen.
b. In the Setup - WebComponents window opens, click Next to continue.
c. Allow the plug-in installation to complete. When the following window appears, click Finish.