User manual

104
3. If installing rmware from a local device such as a USB ash drive or disk:
a. Connect the local device to the NVR, if necessary.
b. Open the Device Name drop down list and select the device that contains the rmware.
c. Click the rmware le you want to load.
d. Click the Upgrade button, the follow the on-screen instructions for completing the upgrade.
4. If installing rmware from a FTP server:
a. Click the FTP upgrade tab at the top of the menu.
b. Click the rmware le you want to load.
c. Click the Upgrade button, the follow the on-screen instructions for completing the upgrade.
5. Open the System Information screen and verify that the new rmware version is installed.
SECTION 8: SYSTEM MAINTENANCE