User manual

SECTION 7: NETWORK SETTINGS

3. In the menu shown above, enter the RTSP port number. The default RTSP port is 1050.

4. Click Apply to save your settings and close the menu.

7.2.6 ConguringServerandHTTPPorts

You can change the server and HTTP ports in the Network Settings menu. The default server port is 8000 and the default HTTP port

is 80.

1. Open the Network Settings menu. Go to Menu | Conguration | Network

2. Click the More Settings tab to open the More Settings menu.

3. Enter a new Server Port number and HTTP Port number in the appropriate elds. The default Server Port is 8000 and the HTTP

Port is 80.

NOTE

The Server Port number must be in the range 2000 .. 65535. it is used for remote client software access.

The HTTP port is used for remote IE access.