Setup guide

ManualsBrandsALIBI ManualsComputer equipmentALI-NVR3004P

ALI-NVR30xxP_SQ

9/22/14

Item Description

Camera (CH1 - CH4) Network interface for IP cameras solely dedicated to the NVR. These cameras can only be accessed through the NVR. Each port

provides Power over Ethernet (PoE) power to the device connected to it. NOTE: Only the Observint line of 3SVision cameras can

be attached to these channels.

Monitor Out (HDMI, VGA) HDMI and VGA connectors for a monitor.

AUDIO IN / OUT Not functional. Included for future expansion.

ON / OFF switch Switch for powering the NVR on and o

USB This port can be used for a portable mobile HDD, ash drive, DVD burner, or mouse. An additional USB port is located on the

front panel.

RS-485 terminations Not functional. Included for future expansion.

Power connector Connector for standard 3-prong power cable.

Remote Control

The enter key on the remote control or the front panel has the same function as a mouse left click. The IR Range of the remote control is 10

meters. The buttons on the remote control correspond with the buttons on the front panel.

7 5

6 4

11141518 16

1213 10

Item Name Function

1 POWER Power on/o the device.

2 DEV Enables/Disables Remote Control.

3 Alphanumeric Buttons Switching to the corresponding channel in Live view or PTZ Control mode.

Inputting numbers and characters in Edit mode.

Switching between dierent channels in All-day Playback mode.

4 EDIT Button Editing text elds. When editing text elds, it will also function as a Backspace button to delete the character in front of the

cursor. On checkbox elds, pressing the EDIT button will tick the checkbox.

In Playback mode, it can be used to generate video clips for backup.

5 A Button Switching between input methods (upper and lowercase alphabet, symbols and numeric input).

6 REC Button Entering the Manual Record settings menu.

In PTZ control settings, press the REC button and then you can call a PTZ preset by pressing Numeric button.

7 PLAY Button Playback, for direct access to playback interface.

This quick setup guide provides instructions to initially setup and use your new network video recorder. For additional information on the

extensive capabilities of your NVR, refer to the ALI-NVR3004P, ALI-NVR3008P Embedded Network Video Recorder User Manual

provided on CD with your system.

NVR Front Panel

IR Sensor

LED Indicators|

USB port

ALI-NVR3000P series NVR front panel

Item Usage

LED indicators Power: The POWER indicator turns green when NVR is powered on.

Status:

1. The light is green when the IR remote control is enabled

2. The light is red when the function of the composite keys (SHIFT) are used

3. The light is out when none of the above condition is met

Tx/Rx: TX/RX indicator ickers green when the network connection is functioning normally.

IR Receiver Sensor for the remote control.

USB Interface This port can be used for a USB mouse or USB ash memory devices.

NVR Backpanels

Camera (CH1 - CH4)

LAN RS-485 Power connector Fan outlet

ON / OFF switchMonitor Out (HDMI, VGA)

Audio IN / OUT

USB

ALI-NVR3004P backpanel

Camera (CH1 - CH4)

LAN RS-485 Power connector Fan outlet

ON / OFF switchMonitor Out (HDMI, VGA)

Audio IN / OUT

USB

ALI-NVR3008P backpanel

ALI-NVR3004P, ALI-NVR3008P Embedded Network Video Recorder Quick Setup Guide

Summary of content (6 pages)

PAGE 1
ALI-NVR3004P, ALI-NVR3008P Embedded Network Video Recorder Quick Setup Guide This quick setup guide provides instructions to initially setup and use your new network video recorder. For additional information on the extensive capabilities of your NVR, refer to the ALI-NVR3004P, ALI-NVR3008P Embedded Network Video Recorder User Manual provided on CD with your system.
PAGE 2
Item Name Function 8 INFO Button Reserved. 9 VOIP button Selecting all items on the list; In live view or playback mode, it can be used to switch between main and spot video output 10 MENU button Press the button will help you return to the Main menu (after successful login). Press and hold the button for 5 seconds to turn off audible key beep. 11 PREV button Switch between single screen and multi-screen mode.
PAGE 3
NOTE 4. Some monitors have multiple inputs such including VGA ,HDMI, BNC, etc. If you are using this kind of monitor, configure your monitor to display the input connected to your NVR (HDMI or VGA). Power on your cameras. 1.1.1 Using the Wizard for basic configuration setup 1. Power on your NVR. When the NVR is powered on, an Alibi logo splash screen appears within 2 minutes.
PAGE 4
5. In the date and time setup window, click the field you want to change, then use the drop-down list or setup aid to select the appropriate values. Click Next to confirm your settings or Cancel to discard them and open the network setup Wizard window. 6. In the Network setup Wizard window, click the field value you want to change, then use the pop-up aid to enter a new value.
PAGE 5
d. Repeat “a” and “b” above for each camera, and/or click Copy to copy the recording mode of the selected camera to other cameras in the system. The screen presented below is for a 4-channel NVR. In the pop-up window, click Menu. A login window will open. In the Login window, select a User Name with administrative privileges, enter its password (the default user “admin” has the default password of “1111”) , then click OK. The following window will open. e.
PAGE 6
Specifications Model ALI-NVR3004P Number of Channels Supported ALI-NVR3008P 4 8 Compression Format H.