User manual
62
i. Click the Action tab. In the Action tab, you can cause certain actions to occur when motion triggered recording occurs.
j. Select the actions you want to occur, then click Apply to save your settings, and OK to return to the Motion Detection
menu.
NOTE
The Notify Surveillance Center and Send Email options require additional network settings.
See “SECTION 7 Network Settings” on page 101 for more information.
k. Repeat step 2.a above for a dierent camera, then repeat steps 2.b through 2.j to setup motion detection for that
camera. Repeat this step until all analog cameras are congured as needed.
5.1.4 Manualrecord
Follow the steps below to begin manual recording. Manual recording, once initiated, requires a manual cancel of the record. The
manual recording can occur prior to the scheduled recording.
1. Open the Manual settings menu. Go to Menu | Manual.
SECTION 5: RECORD, PLAYBACK AND VIDEO BACKUP