User manual
56
6. Repeat steps 2 through 4 for each camera installed on the system.
7. Open the Sub-stream tab page.
a. Congure the sub-\stream parameters for each camera as needed.
b. Click Apply to save the settings.
8. Repeat steps 2 through 5 above for each camera in the system.
5.1.2 ConguringRecordschedule
The record schedule can be used to automatically start and stops recording at preset times.
1. Open the Record Schedule menu. Go to Menu | Record | Schedule
SECTION 5: RECORD, PLAYBACK AND VIDEO BACKUP