User manual

43ALI-HVR3000H Series 960H Hybrid+ DVR User Manual
SECTION 2: INSTALLING THE SYSTEM
4. Click the Detect button to start the detection. Bad sectors are identied in the array as red colored cells. The screen below
shows the Key Area Detection test executing.
Click Pause to temporarily stop the scan, and click Cancel to end the scan.
Click Error info (if errors were found) to see the “Damaged” information.
2.10 Conguring Exception Alarms
The DVR monitors for and respond to certain system-related alarm conditions (exception alarms). Monitoring for and response to
these exceptions are congurable.
Exception alarm conditions include:
• HDD Full: The HDD is full.
• HDD Error: Writing HDD error or unformatted HDD.
• Network Disconnected: Disconnected network cable.
• IP Conicted: Duplicated IP address.
• Illegal Login: Incorrect user ID or password.
• Input/Output Video Standards Mismatch: I/O video standards do not match.
• Record Exception: No space exists for saving recorded les.
• Trigger Alarm Output: Not used.