User manual

42
2. To execute a self-evaluation test on an HDD (see above):
a. On the HDD line, open the drop down list to select the HDD to test.
b. On the Self-test Type line, open the drop down list to select the type of test to execute. You can choose either Short
Test, Expanded Test or Conveyance Test.
c. Click the icon on the S.M.A.R.T. line to execute the test. Allow the test to complete before continuing. The test status is
shown above, and the result of the test is shown on the Self-evaluation line.
3. Examine the S.M.A.R.T. data provided for the HDD. Check to ensure that the data in the value and Worst column does not
exceed the data in the Threshold column.
NOTE
S.M.A.R.T. data provided by each HDD manufacturer is usually dierent. Refer to the manufacturer’s website for S.M.A.R.T. data
denitions.
Bad Sector Detection
1. Open the Bad Sector Detection menu. Go to Main menu | Maintenance | HDD Detect | Bad Sector Detection
2. On the HDD No. line, open the drop down list and select the number of the HDD you want to test.
3. Open the drop-down list to the right of the HDD No. select and then click the test you want to execute.
SECTION 2: INSTALLING THE SYSTEM