User manual

37ALI-HVR3000H Series 960H Hybrid+ DVR User Manual
2.9 Conguring HDD settings
2.9.1 CheckingHDDstatus
Check the status of the HDD installed in the DVR to assure it is functioning normally.
1. Open the HDD Information display. Go to Menu | HDD |General
2. Check the status of the HDD. If the status is:
— Normal or Sleeping - The HDD is working normally.
— Uninitialized or Abnormal - Initialize the HDD before continuing. Check the select box of the HDD to initialize, then
click the Init button at the bottom of the screen.
— Failed - If the HDD failed during or after initialization, replace the HDD.
2.9.2 NetworkStorage
The Add button on the HDD Information screen (see “2.9.1 Checking HDD status” on page 37 above) will be used to add
additional network storage devices (NAS or IP SAN) to the recorder. This feature is reserved for future enhancement.
2.9.3 ConguringtheHDD
By default, all cameras will record to the one partition of the internal HDD. However, you can congure the partition to allocate a
set portion of the partition to each the recordings of each camera. If multiple disks (internal HDD and network drives) are installed,
individual cameras or groups of cameras can be congured to save their recordings to assigned areas on those drives.
SECTION 2: INSTALLING THE SYSTEM