User manual
32
Privacy Mask setup
The Privacy Mask feature allows you to block areas (zones) of the video image for privacy consideration. The zones blocked will
appear covered by a box in both live video and recorded video from the camera. You can dene up to four privacy zones for each
camera.
To block areas of the video image for privacy:
1. Open the Camera Motion menu. Go to Main menu | Camera | Privacy Mask
2. To change the Privacy Mask settings for a camera:
a. On the Camera line, open the drop down list and select the camera you want to congure.
b. On the Enable Privacy Mask line, click the box to check mark it.
c. Using the mouse, drag a box over the area you want to block for privacy. In the example below, Zone 1 covers the ATM
keypad.
SECTION 2: INSTALLING THE SYSTEM