User manual
28
Image setup
Using the Camera Image submenu, you can adjust several aspects of the image (brightness, contrast, etc) to improve the visual
quality of the video. You can congure two dierent camera image setups to adjust the camera for two dierent lighting conditions,
such as day and night.
To adjust the image quality:
1. Open the Camera OSD menu. Go to Main menu | Camera | Image
2. In the screen shown above:
a. On the Camera line, open the drop down list and select the camera you want to congure.
b. On the Period line, open the drop-down list and select either Period 1 or Period 2, and then click the time to the right to
set the time span for the adjustments. NOTE: Time spans for Period 1 and Period 2 cannot overlap.
c. Open the Mode drop-down list and select either Standard, Indoor, Dim Light, or Outdoor to apply preset video
adjustments to the camera. You can also modify those adjustments as described below.
d. On the Brightness, Contrast, Saturation, Hue, Sharpness, and Denoising lines, use the mouse to move the
sliders, or click the up and down arrows on the right, to perfect the video image.
e. Repeat steps 2.b through 2.d above to setup the other time period as needed.
SECTION 2: INSTALLING THE SYSTEM