User manual
27ALI-HVR3000H Series 960H Hybrid+ DVR User Manual
To apply OSD labels to the video image:
1. Open the Camera OSD menu. Go to Main menu | Camera | OSD
2. In the screen shown above:
a. On the Camera line, open the drop down list and select the camera you want to congure.
b. On the Camera Name line, click on the line to open the soft keyboard to edit the name. Click the Enter key to close the
keyboard.
c. On the Display Name, Display Date, and Display Week lines, check the boxes as needed to enable those elds on
the video display.
d. On the Date Format, Time Format, and Display Mode lines, open the drop-down lists and select the options you
prefer.
e. On the OSD font line, open the drop-down list and select the font size for the OSD labels.
f. Use the mouse to drag the labels to the best positions on the video image.
g. Click Apply to save your settings for the camera.
h. On the Camera line, open the drop down list and select a dierent camera you want to congure.
i. Repeat steps 2.a through 2.h above until the OSD for all analog cameras are setup.
SECTION 2: INSTALLING THE SYSTEM