User manual

5. To enter the camera password, click the Admin Password eld, then use the soft keyboard to click in the password of the

camera, click the Enter key, and then click OK to close the window.

6. In the screen shown above, notice that the icon in the Status column changed to a round, blue icon with a “u” symbol. Click

this icon to display live video from the camera. Verify that the video is being played acceptably.

To make conguration changes to the IP camera you added, use Microsoft Internet Explorer to log into the camera directly and use

the conguration menus to modify parameters.

2.7.2 Addinganalog(CCTVandHD-TVI)camerastotheDVR

To add analog cameras to the DVR, connect the video cable from the camera to a BNC connector on the back panel. When the DVR

senses the video, the camera is automatically added to the system. NOTE: when adding cameras to the DVR, do not exceed the

channel capacity of the DVR.

2.7.3 Congureanalogcameras-basicadjustments

Basic conguration adjustments for analog cameras include setup of the OSD (On Screen Display) labels on the video image, Image

settings (brightness, contrast, etc.), setting Motion detection zones, and setting Privacy zones.

OSD setup

Using the Camera OSD submenu, you can apply labels to the video image from your cameras to easily identify the camera,

timestamp, etc.

SECTION 2: INSTALLING THE SYSTEM