User manual
19ALI-HVR3000H Series 960H Hybrid+ DVR User Manual
To add the IP camera shown in the screen below, click the box for the camera in the list you want to add to check mark it, then
click the Add button. Click Next to continue.
11. In the camera recording screen, you can initially select the recording mode for each camera attached to the camera input BNC
connectors on the back panel and the IP cameras you added. By default, the DVR is congured to record the video from all
cameras continuously.
Click here to open
the camera
graphical menu
To use this menu:
a. Open the Camera options graphical menu and select the camera to congure. “1” (Analog 1) identies the camera
plugged into the camera input BNC connector 1, “2” (Analog 2) identies the camera on BNC connector 2, etc. In the
screen below, camera “5” is the IP camera added in the previous screen.
SECTION 2: INSTALLING THE SYSTEM